CS9931YS-PT-2K 2000W
Measuring, Testing & Calibration
Fitur :
• Display 7" TFT 65K, dengan resolusi 800x480
• Pada panel depan terdapat dua buah USB interface, yang berfungsi untuk menyimpan/mengirim data ke flashdisk serta dapat juga digunakan untuk menghubungkan dengan scan barcode
• Dapat Otomatis menyimpan data dalam bentuk format EXCEL
• Test Kebocoran Arus sesuai dengan standart GB9706. l-2007 (IEC60601-"88),ULN544P,UNL544NP
• Terdapat 4 jenis metode deteksi Kebocoran Arus meliputi: AC,AC+DC,PEAK,DC
• Test kebocoran dapat mengukur tegangan di terminal MD, tanpa membutuhkan eksternal voltmeter sesuai dengan GB/T l2 l l 3,IEC60990(metode perhitungan contact) dan test kebutuhan proteksi arus
• Dapat menampilkan setiap pergerakan switch(ON/OFF switch) pada layar saat pengujian berlangsung
• Dapat menampilkan tes Single Fault
• Tidak perlu mematikan unit ketika test kebocoran dengan merubah polaritasnya
• Tersedia Daya tambahan yang diperukan untuk test, dengan minimum kebocoran Arus 20mA
• Pengukuran otomatis dengan sistem kontrol
• Interface dengan PLC, lengkap dengan RS232,RS485,LAN Interface
| Merk | Elitech | ||
|---|---|---|---|
| Model | CS9931YS-PT-2K (2000W) | ||
| ACW | Output voltage | ||
| Range | 0.050kV ~ 5.000kV | ||
| Accuracy | ±(2% read value +5V) | ||
| Resolution | 1V | ||
| Max output power | 100kVA(5.000kV/20mA) | ||
| Test current range | 20mA | ||
| High-limit | 0 ~ 0.499mA | ||
| Low-limit | 0.001 ~ 2mA | ||
| Range | 200µA, 2mA, 20mA | ||
| Output Waveform | Sine waveform | ||
| Waveform distortion | ≤5%(Unloaded or pure resistance of the load) | ||
| Crest factor | 1.3 ~ 1.5 | ||
| Output signal type | DDS + Linear amplifier | ||
| Rise time | 0, 0s ~ 999.9s, 0= OFF | ||
| Test time | 0, 0.3s ~ 999.9s, 0= Continuous | ||
| Fall time | 0, 0s ~ 999.9s, 0= OFF | ||
| Interval time | 0, 0s ~ 999.9s, 0= OFF | ||
| ARC | 0 ~ 9, 0=OFF | ||
| DCW | Output Current | ||
| Range | 0.050kV ~ 6.000kV | ||
| Accuracy | ±(2% read value +5V) | ||
| Resolution | 1V | ||
| Max output power | 60kVA (6.000kV/10mA) | ||
| Test current range | 2µA, 20µA, 200µA, 2mA, 10mA | ||
| High-limit | 0 ~ 0.499mA | ||
| Low-limit | 0.001 ~ 2mA | ||
| Ripple coefficient | ≤5% (6kV/10mA) | ||
| Discharge time | ≤200ms | ||
| Voltage rise time | 0, 0s ~ 999.9s, 0= OFF | ||
| Test time | 0, 0.3s ~ 999.9s, 0= Continuous | ||
| Fall time | 0, 0s ~ 999.9s, 0= OFF | ||
| Interval time | 0, 0s ~ 999.9s, 0= OFF | ||
| GR | Output Current | ||
| Range | (3.0 ~ 32.0)A | ||
| Accuracy | ±(2% read value +0.1A) | ||
| Resolution | 0.1A | ||
| Max output power | 153.6VA | ||
| Low-limit of GR | 0 ~ Hi-limit set | ||
| Output waveform | Sine waveform | ||
| Waveform Distortion | ≤3%(Unloaded or pure resistance of the load) | ||
| Crest factor | 1.3 ~ 1.5 | ||
| Output signal type | Linear amplifier | ||
| Rise time | 0, 0s ~ 999.9s, 0= OFF | ||
| Test time | 0, 0.3s ~ 999.9s, 0= Continuous | ||
| Interval time | 0, 0s ~ 999.9s, 0= OFF | ||
| LC | Output Current | ||
| Range | (3.0 ~ 32.0)A | ||
| Accuracy | ±(2% read value +0.1A) | ||
| Resolution | 0.1A | ||
| Max output power | 153.6VA | ||
| Current range | 0 ~ Hi-limit set | ||
| Detection method | Sine waveform | ||
| Upper limit set | ≤3%(Unloaded or pure resistance of the load) | ||
| Lower limit set | 1.3 ~ 1.5 | ||
| Human network | Linear amplifier | ||
| Voltage rise time | 0, 0s ~ 999.9s, 0= OFF | ||
| Test time | 0, 0.3s ~ 999.9s, 0= Continuous | ||
| Interval time | 0, 0s ~ 999.9s, 0= OFF | ||
| Auxiliary Voltage | Range | 30.0V ~ 250.0V | |
| Accuracy | ±(2% read value +1V) | ||
| Resolution | 0.1V | ||
| Memory group | 50 | ||
| Test steps | 40 | ||
| Input power supply | 220V/50Hz | ||
| Dimensi | 49(P) x 63(L) x 123(T)cm | ||
| Berat | ± 135 kg | ||
| Kondisi Pemakaian Normal | Suhu | 15ºC - 40ºC | |
| Kelembaban | < 90% | ||
| Athmosphere | 80kpa-105kpa | ||
| Transportasi dan Penyimpanan | Suhu | -20ºC - +65ºC | |
| Kelembaban | < 90% | ||
Price : Link to e-Catalogue
Measuring, Testing & Calibration / Electrical Safety Analyzer (ESA) 2000W